How to Hydro Dip with Acrylic Paint? – Strat Hydro Dipping From Now

Hydro dipping has become the newest trend that took over the internet web all over the world. It is a “hype” now on the excellent painting process and less time dimension.

The best about this transfer painting is, it allows you to look for a substitute rather than spray paint. Although there are so many reasons to work with acrylic paint, this method is famous primarily for the versatility it offers and the smooth finishing that you would expect in your craft.

So, if you are looking for a better option for your painting and hoping to get the best outcome, you have come to the right place!

Why Would You Use Acrylic Paint?

Being a painting lover, especially if you are a beginner, the first thing you’ll want is an easier painting- method to avoid all the complexity and laborious clean-up process. Acrylic paint, in this case, serves you the best!

Acrylic paint can be easily mixed with water and ensures an even finish on the surface. You can also adjust the amount of water anytime, depending on your preference. It is easy to use and requires only the least amount of paint.

In contrast, spray paint requires a lot more and is expensive too. So, it’s a way better option for anyone with a long or short start- to- finish project.

What is the Difference Between Hydro Dipping and Ordinary Painting?

Hydro dipping is a particular sort of water transfer printing. Recently, this process has gained popularity for its unique procedure and high-end finish.

The other standard methods would bind you with collecting a pricey kit, using a specific object to paint on. But hydro dipping can experiment with any three-dimensional object. Just be careful about this-

  • Keeping distance from the electric metals or the objects which can damage by water.
  • Avoiding painting on concrete.

5 Easy Steps to Hydro Dip with Acrylic Paint

Though it sounds intimidating, it’s nothing like that! All you need to have is to start it and be patient until you finish the whole process.

1. Basic Appliances

Getting suitable materials is the first thing to ensure a good outcome for the project. We have categorized some of the elements to make it a bit easier for you-

  • Water
  • Acrylic paint
  • Primer
  • Any three- dimensional item
  • A large container
  • Toothpick or brush
  • Cornstarch

2. Create a Thickened Water Base

The base is the foremost thing that works as a decider how your painting would look like. If it’s thin, it will not mix up properly. But as you are using it to paint on, the main design should float on the top.

Take a pot or jar, pour 2 to 3 cups of water, and let it boil on the stove. Then take a glass of cold water and mix ¼ cup of cornstarch in that and mix well. Now pour the glass of starch mixture into that jar and turn off the gas. Please wait until it cools down fully.

3. Prepare the Paint

As you’ve already made the water base thicker, the paint base should be thinner.

Get a mixing container and pour the paint into it. As you will use different acrylic colors, it’s clever to run a specific colored paint in a fixed box and so it won’t stick like spray paint. Now, stir them slowly, put a small amount of water, and mix it until you get the perfect consistency for your coloring.

4. Hold the Base into a Container

If you observe the watery part, it would be cold enough now to start. Pour the base gently into a large container. 1 or 2 inches of the bottom filled with base is an ideal quantity.

Then add a bit of the acrylic paint. Make sure to mix very slowly so that the color floats on the surface. Firstly, it would spread a bit, but it would stay on the top after a while, and you’ll get the perfect saturation.

Draw the structure you want on the paint through a toothbrush or toothpick.

5. Dip the Object

Now you are done with all the procedures, and it’s finally time to see the object decorated in your desired way!

Before dipping the item, put masking tape on the area you don’t want it to paint. Hold the upper surface of the object and dip it for a few seconds. Keep it for 30 minutes, let it dry, and get your aspired pattern in front of you.

Final Words

Walking through this whole process is a thrilling and versatile experience at the same time. Though you get the best result immediately or after some more attempts, our above tips will work as a great companion in your journey. So, no matter how many difficulties you may face, make sure to give it a try!

Leave a Comment