How to Sew Quilt Batting Together Like A Pro?

Quilt batting is situated in the middle layer of a quilt. This material allows you to enjoy the softness and warmth of the fabric.

There are different types of quilt batting – low-loft and high-loft. The former one is fluffy, whereas the latter one is even fluffier than usual.

If you have done quilting, it is obvious that you know the importance of sewing quilt batting and the benefits behind it.

Suppose you are a beginner and you don’t know the procedure to get successful results. In this case, you might ask, how to sew quilt batting together?

Don’t worry; we have got your back.

From the following article, you will know the total process that is easily written for your benefit. Plus, you will find other information that can help you out in the long run.

Without wasting any more time, let’s get started.

How to Sew Quilt Batting Together

how to join batting

Sewing Pieces of Quilt Batting

how to sew two pieces of quilt batting together

In this method, you will be sewing two pieces of quilt batting.

Below, we have added a step-by-step process that you can follow to get the job done. Take notes whenever you find something important.

Supplies Needed

  • Quilt batting (2 pieces)
  • Sewing machine

Step 1: Machine Setup

Start with setting the machine in a way that makes giant-sized zig-zag stitches. Set it to the widest as well as tallest for the zig-zag.

Step 2: Run the Machine

Join the edges of the two pieces of batting scraps and start sewing them with the machine. In this way, the seam will move down the mid-portion. Plus, the zigs and zags will start to capture the batting (some amount) on each side.

Step 3: Finish It Off

Backstitch at the starting and ending parts so that the batting remains fixed permanently. This will help you out when you are going to sew it on the quilt.

Sewing the Quilt Batting to the Quilt

quilt batting sewing

This method is straightforward. With the proper supplies and technique, you will have a comfortable and attractive quilt that will make you happy within an instant.

Supplies Needed

  • Quilt batting
  • Partially-made quilt
  • Needle
  • Thread
  • Scissors
  • Pins
  • Backing fabric

Step 1: Decide the Type of Quilt Batting

Before you start sewing, you have to check the kind of material you are tackling. Once you have done that, you should iron the quilt gently. Make sure there are no creases or kinks left behind.

Be mentally prepared that the task will take an hour or even more according to your performance.

Step 2: Organize Everything

Take the quilt and lay it smoothly on a flat surface. A large area will perfectly do the work.

If you have a handiwork or dinner table, that’s great, and if you don’t have one, no problem. Use the floor, and the result will be the same.

Don’t lay it on the floor immediately. Clean the floor first and put some paper on top of it so that the quilt doesn’t get dirty.

Organize all the supplies (mentioned above), and jump into the next step.

Step 3: Trim Unnecessary Batting

Slowly put the batting on the quilt and look for any unnecessary batting. If you manage to find it, trim them so that you can get a precise outcome.

Now, take the backing fabric and put it on the top portion of the batting. Check all the areas and confirm that it is properly adjusted and fitted.

Step 4: Pin the Layers of the Material

Start pinning all the layers of the material together. Begin with a line of pins and take it towards the quilts’ center. Then, include additional lines that are parallel to the first one.

Keep in mind that the row of the pins should be at least 18 inches from one another.

Step 5: Put the Quilt on a Frame

This step is the most important part of all. Be patient throughout the whole time, and start this task with full confidence.

Turn the quilt and check once again for any signs of damage (wrinkles, etc.). If possible, unpin the lines that are affected and then begin again. You can do this because the targeted areas might create a problem at some point after you are done with the work.

When everything is done, starting from unpinning to clearing off the wrinkles, put the quilt on a frame. Sew a couple of stitches to fix the quilt batting in its place. After that, you can take off the pins without any hesitation.

Step 6: Start Sewing

Use stitches (small-sized) in this step when you stitch the layers together. Look at the seam lines of the fabric and start sewing along that direction. Do it between the various fabrics’ pieces in the quilt.

Also, you can use a different technique. In this approach, you have to sew an overall (or total) quilt pattern, which sews on the quilts’ design. This creates an individual pattern that will look very creative all the time.

And this one is a traditional technique applied by many countries, especially in Europe, for more than 100 years.

Step 7: Finish It Off

When the quilt batting task is completed, you should sew the quilts’ edges with a border. You can purchase this from different craft stores and if you don’t manage to find it, use tape, and you are good to go.

Also, cut the corners gently and carefully. Keep proper eye contact from start to end and constantly check the accuracy.

After you are done with the sewing, detach the original stitches. These are the ones that pinned the quilt batting to the quilt.

If you want to know about the finished or final quilt stitches’ measurement, keep it at a minimum of 1/8 inches long. This will give out the best outlook that will lift your mood.

Avoid the overall stitch technique if you plan to use some important stuff on your beloved quilt.

Tips of Piecing Batting Together

Piecing Batting Together

Follow these tips so that you can avoid problems during your work. 

Tip 1: Use a Sewing Machine If You Don’t Want to Do It by Hand

If you don’t prefer to sew it by hand, you can take a machine’s help. You should adjust the equipment to make giant-sized zig-zag stitches. While sewing, do it in a slow manner.

Tip 2: Maintain Your Full Concentration

Keep the kids in a different room when you are busy with this task. This will give you the full focus that is mandatory for this type of work. Moreover, there won’t be any uncertain accidents due to that.

Tip 3: Start Sewing with a Small Amount of Quilt Batting Pieces

When you are going to sew, do it for a small number of pieces. This will give you the size that you want in the first place.


Hope you have got all the details that you were searching for from this article.

Share this information on how to sew quilt batting together with your friends and families.

Take care. Have a good day!

Leave a Comment